Bump, Anyone?

Hi All,

We have configured the esp32 as a BLE peripheral that setups a WiFi AP that we then connect to with a user's phone.

We have run into some issues when developing our iOS app.
We are currently talking to apple about these issues because we believe they are bugs in iOS as the same issues are ...

Bumping to see if anyone can help with my question.

Cheers.

Hi All,

I have a currently working uart messaging protocol that sends variable lenght messages between the esp32 and another microcontroller.

I am wanting to change from the current method, which keeps the uart task very busy with small vtask_delay's, to an interrupt based reception. This is to ...

Bump, @ESP_Angus, any thoughts on this?

It seems to be related to the macro

Hey All,

Trying to get small build binaries, and ultimately byte identical build repeat-ability on different computers, however i am running into some issues.
I have tried to disable all logging, as well as more importantly removing the assert prints using the silent assert mode( and even with ...

You might have to test out when the baud rate mis-match starts causing issues between the two processors.

Usually the lower the baud rate, the less of an issue this is.
4800 baud is pretty slow so you should be fine.

This dev board uses the standard Wroom32 module from espressif.

The code that is currently loaded into the Chip is the standdard hello world application in the espressif ESP-IDF on githib.

You should be able to load and program all the standard examples to this board.

Also try making your connection interval shorter. this may improve the transfer time.

Out of curiosity approximately what is the update time once you increased the MTU to 500?

Thanks for the feedback @ESP_Sprite.

Looks like there is going to be an even better chip coming the the next little wile (well at least little while on a new silicon timeframe..)

One thing to mention about the USB 2.0 Perhaps if for the next chip adding a 2.0PHY is not possibly/practical, enabling ...