Hi,

I have the exact same issue.

My flash command looks like this:
--flash_mode dio --flash_freq 80m --flash_size 4MB
0x1000 bootloader/bootloader.bin
0x20000 myfw.bin
0x8000 partition_table/partition-table.bin
0xf000 ota_data_initial.bin
0x220000 config.bin

partition.csv
# ESP-IDF Partition ...

Ok, thank you for the info

Hi,
is there a way to customisze the USB PID / Manufacturer string etc. when using the USB OTG Console as described here https://docs.espressif.com/projects/esp ... nsole.html

Hi,
is there an official roadmap for the development of the Espressif IDF somewhere?
I'm especially interested in the USB support for the ESP-S2.
The current IDF v4. 3-beta3 seems to only support the CDC device class.
Do you know when further device types like mass storage devices will be supported?

Hello,
I want to use PIN 29 (SPICS1/GPIO26) as a digital input pin. The chip I'm using is a ESP32-S2 (WROOM Module).

According to the datasheet this pin is used as CE# for the internal PSRAM on the ESP32-S2FN4R2 variant and it is therefor not recommended for other uses. However, we are using the ...