Hello,

I also checked, this issue happens with unicast.
Minimum viable example is based on the udp_client but with one thread receiving (without any serial/debugging output) and one thread sending a 64 byte message every 10 ms.

Thanks in advance.

Hello,

I do have an issue with my setup:
- ESP32-WROVER-IE
- Wifi disabled
- Ethernet via ENC28J60 lib from examples
- UDP Multicase Setup according to examples
- One Thread sending UDP messages cyclically (forwarding from a UART stream)
- One Thread receiving UDP messages (sound forwarded to i2s ...

Hi, for my esp8266 I used the same with a diode for voltage drop inbetween so I am only slightly out of spec.
This saves more power than a regulator and furthermore is dirt cheap. The devices are running since 4 years without an issue.
Of course this may or may not work on large scale, I only have ...

Hello,

I am using a ESP32 and want to connect it with a MCP2515 CAN-Transceiver (I am aware of the integrated transceiver which is already in use).

I have used the same module with an esp8266 already and rewrote the CAN-Driver in IDF.
The issue is, that my slave seems dead, i.e. the MISO port is ...