Hi,

i'm using an ESP32 with the Arduino IDE and use the Wifi.h library actually.
Now i've seen, that there is also an esp_wifi.h library.

Does this library:
- provide additional functions, means can be used in parallel OR
- is an alternative library you can use instead of wifi.h? If yes: Is it ...

Really no one that can help?
It's really sad: Also on my last post i didn't get any answer ;-(

Hi all,


can you confirm that the SD-Card performance is very bad in core 2.0.2?
I have tried this example (from the examples folder):


/*
* Connect the SD card to the following pins:
*
* SD Card | ESP32
* D2 -
* D3 SS
* CMD MOSI
* VSS GND
* VDD 3.3V
* CLK SCK
* VSS GND
* D0 MISO
* D1 ...

Hi,

my esp32 just crashed with the following error message:

assertion "dns server out of array" failed: file "/home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/lwip/lwip/src/core/dns.c",$
abort() was called at PC 0x40111d23 on core 1

ELF file SHA256 ...

Hello all,

I would like to integrate a login procedure into my ESP32 Arduino Sketch as follows:

1. the ESP starts in WIFI_AP_STA mode.
2. the user connects to the accesspoint.
3. the user calls http://192.168.4.1 and gets to the login page.
4. the user enters his WLAN access data into a form and ...

Before uploading the Original Sketch you must choose a Partition scheme which provides enough space for subsequent OTA operation. Maybe you have set a partition scheme without OTA support or with too less OTA partition.

Best wishes
Daniel

Hi,

I have the same question/problem.
mDNS in station mode works but in AP mode or in my case WIFI_AP_STA mode does not work ;-(

Really no one that can help?

Best wishes
Daniel

Hi,

it seems, that WiFi.scanNetworks(); disconnects the active AP connection.

I want that the user connects to AP-mode and then calls 192.168.4.1 to enter the server page.
Then the user should be able to press a button "scan for Wifi networks" and then should get a list of available WiFi-networks ...

OK, that sounds good.
Thank you for your detailed answer.

Best wishes
Daniel

Hi,

really no one that can help ;-(

Best wishes
Daniel