Because finalizing and starting a new transfer takes time. You're probably better off merging those transfers if you want zero overlap.

I actually tried. I needed the output in an infinite loop, but it failed due to a lack of RMT memory.I think this is transmitor time less than encoder time.

I've noticed in successive calls to the rmt_transmit function that neighboring encoders create intervals. How do I phase out this time?

图片1.png



rmt_transmit(crs_channel, crs_encoder, &crs_gear_wave[out_index], sizeof(uint16_t), &crs_transmit_config);
// rmt_transmit(cas_channel, cas ...

In the following code,
In the following code, how do I dynamically modify the duration0 parameter already configured in the object nec_encoder->bytes_encoder of the rmt_encoder_handle_t structure?

[Codebox=c file=Untitled.c]
typedef struct
{
rmt_encoder_t base; // the base "class", declares the ...

Follow your instructions,I tried a few times and it didn't work. I may have some missteps that caused it to not compile properly.
It is expected that ESPTINYUSB can be used in ESP-IDF in the future.

"USB vendor class with Microsoft OS descriptor": https://www.esp32.com/viewtopic.php?f=2&t=24150&p=105144#p105144
Similar to this theme.I want to implement the WinUSB driver via IDF V4. But the official demo is only CDC and MSC. Tinyusb comes with a webUSB demo, but it doesn't compile successfully ...

Hello, is it possible to provide a demo? I would like to implement a similar idea, but at the moment I have no clue.

我正在考虑移植基于stm32的can2usb的固件（https://github.com/candle-usb/candleLight_fw）。该方案使用winusb方式现实，并且完全自定义usb的描述符。
我了解了esp32的tinyusb库，并使用了tusb_sample_descriptor_main的demo，但是这个demo并不完整，它只有简单示例如何配置DeviceDescriptor。
如何基于tinyusb实现自定义的usb通讯，并且符合winusb要求，以达到我的can2usb的目的？
以下为stm32的主要代码：
/* CAN interface class ...

抱歉，不知道论坛的规矩。我习惯性按了ctrl+enter导致信息没写完就被发送了。这个功能主要是实现在线优化调参，然后再烧写入ecu。通常在汽车里，通过can总线使用xcp协议在线修改单片机里指定地址的变量的值，实现在线修改变量的值。可修改的标定量被写成const，但是const的变量无法在线修改，所以需要把被写成const的变量映射到ram里进行修改。在线调试得到最优参数后，我将重新烧写。

这个功能主要是

你是希望把在线修改完的数据再回写到 flash？ 答：是的。