Hi Raul,
I'm having the same problem. Did you manage to resolve this?

Best.

Hello,
No I dropped this and skipped to make any changes in bootloader it self, so did not check anything further in this.

https://github.com/espressif/esp-idf/bl ... wip.c#L154

Hi WiFive,
Thanks for the quick response,
Now I am able to set default interface Eth/wifi with setting default netif.

Thanks.

Hello,

I am initializing Ethernet and WiFi in STA mode from main, then ESP32 is getting connected to cloud once both Ethernet and WiFi STA gets IP. I checked by disconnecting Ethernet and WiFi one by one to check which interface is being used for cloud connection, and I found that there is no ...

The other thing you can try, which is strongly recommended, is to checkout the "release/v2.1" branch (currently at commit c70a613127). Compared to updating to v3.x, this shouldn't require any code changes, but there are a number of fixes in that branch including fixes for problems writing to SPI ...

The other thing you can try, which is strongly recommended, is to checkout the "release/v2.1" branch (currently at commit c70a613127). Compared to updating to v3.x, this shouldn't require any code changes, but there are a number of fixes in that branch including fixes for problems writing to SPI ...

Hello,
I am facing issue with following mention scenario with http client used to download file to ESP32. I am using IDF2.1 currently.

1. Create socket and connect to server.
2. HTTP GET requests for chunk size of @1500 until all data has been received.
3. Parse and Store received payload into ...

Hello Guys,
Can you please look above configurations if I am missing anything.?

Thanks.

Hello Guys,
Can any body help me with this.?

Thanks.

Hello,
I have a requirement to use I2C in bootloader in master mode. As I2C driver is not added as component into bootloader, using I2C with low level registers is the only way to do it.
I have tried to configure I2C registers from TRM as below, but not getting success.
Can anyone point me out what ...

No, I think this is just a chosen tradeoff due to the amount of code which needs moving to IRAM.

We have some features coming in future IDF versions which will make it easier to configure which code is moved into IRAM, but you should be able to modify uart.c now to do this. Just take care that ...