Search found 62 matches

by ESP_Me-no-dev
Wed Jun 12, 2019 7:11 am
Forum: ESP-WHO
Topic: ESP-EYE __ Camera init failed with error 0x20003
Replies: 1
Views: 270

Re: ESP-EYE __ Camera init failed with error 0x20003

Can you swap the sensor on that board and try again? Put one from the other working cams and see if it's the board or the sensor that is faulty (I will bet on the sensor here). Error means that the ESP was not able to communicate over I2C with the camera, but the line before that means that the came...
by ESP_Me-no-dev
Wed Jun 12, 2019 7:02 am
Forum: ESP32 Arduino
Topic: ESP32 CAM direct access to image data
Replies: 10
Views: 732

Re: ESP32 CAM direct access to image data

I don't agree that things are not well documented. The camera driver is rather a basic thing. You setup the camera and start grabbing frame buffers from it. Structure of the frame buffer is in the header. Frame buffer in every case that I have seen contains an array of pixels in the form of (width *...
by ESP_Me-no-dev
Tue Jun 11, 2019 2:09 pm
Forum: ESP32 Arduino
Topic: ESP32 CAM direct access to image data
Replies: 10
Views: 732

Re: ESP32 CAM direct access to image data

I'm really sorry you find this so frustrating. I had no idea that "GRAYSCALE", "RGB565" or any other of the formats need explanation. 1. GRAYSCALE means values from 0 to 255 for each pixel 2. RGB565 means that a 16 bit value is per pixel and is comprised from 5 bits red, 6 bits green and 5 bits blue...
by ESP_Me-no-dev
Fri Mar 01, 2019 10:00 am
Forum: ESP32 Arduino
Topic: SPI slave mode, CLK cannot be on input only pin (see GitHub issue #2455)
Replies: 3
Views: 548

Re: SPI slave mode, CLK cannot be on input only pin (see GitHub issue #2455)

I'll try to update the IDF libs over the weekend. That should fix the issue :)
by ESP_Me-no-dev
Thu Feb 21, 2019 7:46 am
Forum: ESP32 Arduino
Topic: ESP32 development board with OV2640 Camera
Replies: 2
Views: 641

Re: ESP32 development board with OV2640 Camera

Hey! :) You can search online for waveshare ov2640 and you will find a module with the camera and two row header. This will let you easily connect the camera to your board, but please be noted that your board does not have PSRAM and this will limit much what you can do with the camera. I advise you ...
by ESP_Me-no-dev
Mon Dec 17, 2018 7:05 pm
Forum: ESP32 MDF
Topic: Meshkit-light video example explanation wanted
Replies: 13
Views: 2925

Re: Meshkit-light video example explanation wanted

While iOS will be definitely fully supported (Desktop also), as of now they are not so much. If you can have an Android emulator be able to access your BT in the Mac, then you could probably try that.the bulb and it's board are capsulated and filled with some sort of technical cement, so you do not ...
by ESP_Me-no-dev
Thu Dec 13, 2018 9:25 am
Forum: ESP32 MDF
Topic: Meshkit-light video example explanation wanted
Replies: 13
Views: 2925

Re: Meshkit-light video example explanation wanted

Sorry, I personally have no idea about possible channels to obtain the bulbs, but I am pretty sure that Mouser has them also. You flash the bulbs through the Android App, which does it in the OTA fashion, so no pins are required :) Arduino is not yet supporting the full MDF. Once all heavy developme...
by ESP_Me-no-dev
Tue Dec 11, 2018 12:25 pm
Forum: ESP IoT Solution
Topic: trying to send buffer data to node-red through mqtt
Replies: 4
Views: 969

Re: trying to send buffer data to node-red through mqtt

Why do you use String to collect byte data? Not all bytes are printable chars. Did you try to ask around in the PubSub repository?
by ESP_Me-no-dev
Tue Dec 11, 2018 12:21 pm
Forum: ESP IoT Solution
Topic: problem with esp32 and wire library
Replies: 1
Views: 894

Re: problem with esp32 and wire library

Please post your issue in the Arduino tracker https://github.com/espressif/arduino-esp32/issues and also post a clear info on what is not working, what messages are you getting in the console and wether you have debug enabled or not.

Go to advanced search