Search found 69 matches

by ESP_Me-no-dev
Fri Mar 01, 2019 10:00 am
Forum: ESP32 Arduino
Topic: SPI slave mode, CLK cannot be on input only pin (see GitHub issue #2455)
Replies: 3
Views: 1588

Re: SPI slave mode, CLK cannot be on input only pin (see GitHub issue #2455)

I'll try to update the IDF libs over the weekend. That should fix the issue :)
by ESP_Me-no-dev
Thu Feb 21, 2019 7:46 am
Forum: ESP32 Arduino
Topic: ESP32 development board with OV2640 Camera
Replies: 2
Views: 1722

Re: ESP32 development board with OV2640 Camera

Hey! :) You can search online for waveshare ov2640 and you will find a module with the camera and two row header. This will let you easily connect the camera to your board, but please be noted that your board does not have PSRAM and this will limit much what you can do with the camera. I advise you ...
by ESP_Me-no-dev
Mon Dec 17, 2018 7:05 pm
Forum: ESP32 MDF
Topic: Meshkit-light video example explanation wanted
Replies: 13
Views: 5844

Re: Meshkit-light video example explanation wanted

While iOS will be definitely fully supported (Desktop also), as of now they are not so much. If you can have an Android emulator be able to access your BT in the Mac, then you could probably try that.the bulb and it's board are capsulated and filled with some sort of technical cement, so you do not ...
by ESP_Me-no-dev
Thu Dec 13, 2018 9:25 am
Forum: ESP32 MDF
Topic: Meshkit-light video example explanation wanted
Replies: 13
Views: 5844

Re: Meshkit-light video example explanation wanted

Sorry, I personally have no idea about possible channels to obtain the bulbs, but I am pretty sure that Mouser has them also. You flash the bulbs through the Android App, which does it in the OTA fashion, so no pins are required :) Arduino is not yet supporting the full MDF. Once all heavy developme...
by ESP_Me-no-dev
Tue Dec 11, 2018 12:25 pm
Forum: ESP IoT Solution
Topic: trying to send buffer data to node-red through mqtt
Replies: 4
Views: 2369

Re: trying to send buffer data to node-red through mqtt

Why do you use String to collect byte data? Not all bytes are printable chars. Did you try to ask around in the PubSub repository?
by ESP_Me-no-dev
Tue Dec 11, 2018 12:21 pm
Forum: ESP IoT Solution
Topic: problem with esp32 and wire library
Replies: 1
Views: 2233

Re: problem with esp32 and wire library

Please post your issue in the Arduino tracker https://github.com/espressif/arduino-esp32/issues and also post a clear info on what is not working, what messages are you getting in the console and wether you have debug enabled or not.
by ESP_Me-no-dev
Tue Dec 11, 2018 8:21 am
Forum: ESP32 MDF
Topic: Meshkit-light video example explanation wanted
Replies: 13
Views: 5844

Re: Meshkit-light video example explanation wanted

In the case of this demo, yes, every light is flashed with mqtt capable firmware. MQTT is already in IDF, so building a mesh firmware with added support is easy :) Unless you force a node to not be master (or you force particular one to be master), all nodes must be capable of MQTT else you can not ...
by ESP_Me-no-dev
Mon Dec 10, 2018 10:28 am
Forum: ESP32 MDF
Topic: Meshkit-light video example explanation wanted
Replies: 13
Views: 5844

Re: Meshkit-light video example explanation wanted

In this demo, the PI/MQTT only collects the information, though adding control through it is not any different than other MQTT implementations. Each MESH device in this case has the code required for it to talk to MQTT if it is the Mesh Master. The same way that the master publishes the updated info...
by ESP_Me-no-dev
Wed Sep 20, 2017 6:45 am
Forum: ESP32 Arduino
Topic: Getting TG0WDT_SYS_RESET in latest code.
Replies: 2
Views: 2137

Re: Getting TG0WDT_SYS_RESET in latest code.

try to change

Code: Select all

void __zx_isr()
to

Code: Select all

void IRAM_ATTR __zx_isr()

Go to advanced search