Search found 51 matches
- Thu Dec 05, 2019 4:18 am
- Forum: ESP-MDF
- Topic: firmware upgrade encryption using mupgrade
- Replies: 2
- Views: 9517
Re: firmware upgrade encryption using mupgrade
The current version has this problem, and we will add encrypted APIs in later versions.
- Fri Oct 11, 2019 2:16 pm
- Forum: ESP Mesh 中文讨论版
- Topic: esp_mesh_set_parent 重新连接问题
- Replies: 3
- Views: 14893
Re: esp_mesh_set_parent 重新连接问题
1. 201 对应的错误码是 WIFI_REASON_NO_AP_FOUND, 你需要自行加上
2. 由于手动组网的方案,组网的过程需要你自己跟据需要来添加, example 中并不包含所有的场景. 我们还是推荐你使用自组网的方案,如果自组网方案不能满足你的需要请提出? 自组网方案参见: https://github.com/espressif/esp-mdf
Code: Select all
|| event.info.disconnected.reason == WIFI_REASON_NO_AP_FOUND
- Thu Oct 10, 2019 12:28 pm
- Forum: ESP-MDF
- Topic: Sending data bigger than 8kB with MWIFI Router Example
- Replies: 3
- Views: 10656
Re: Sending data bigger than 8kB with MWIFI Router Example
ESP-MESH does not support data stream transmission. When the data packet exceeds 8k, fragment transmission is required. Our OTA data packet is also more than 1MB, and the method of fragment transmission is also adopted.
- Thu Oct 10, 2019 12:16 pm
- Forum: ESP-MDF
- Topic: Reduce the connection time of Root node
- Replies: 1
- Views: 7302
Re: Reduce the connection time of Root node
You only need to modify the Mesh softAP association expiration time to 10000ms.
- Thu Oct 10, 2019 12:11 pm
- Forum: ESP-MDF
- Topic: ESP-MESH + ESP-NOW
- Replies: 2
- Views: 30266
Re: ESP-MESH + ESP-NOW
1. ESP-MESH\ESP-NOW\Connecting Router can be run simultaneously on one ESP32 2. At present, ESP-NOW only supports binding of 20 devices at the time of sending, and receiving data is not limited. 3. The power consumption of ESP-NOW can be found at: https://github.com/espressif/esp-mdf/blob/master/exa...
- Thu Oct 10, 2019 12:01 pm
- Forum: ESP-MDF
- Topic: ESP32 Mesh Mlink protocol
- Replies: 4
- Views: 11075
Re: ESP32 Mesh Mlink protocol
The device sends a UDP broadcast notification via `mlink_notice_write()`.
The client needs to start a udp sever to receive,
The default port for UDP broadcast is 1025, you can modify it with `make menuconfig`
The client needs to start a udp sever to receive,
The default port for UDP broadcast is 1025, you can modify it with `make menuconfig`
- Thu Oct 10, 2019 11:51 am
- Forum: ESP Mesh 中文讨论版
- Topic: 按照官网的mesh 人工组网例子manual_networking,出现持续201错误
- Replies: 2
- Views: 14389
Re: 按照官网的mesh 人工组网例子manual_networking,出现持续201错误
1. 201 是 WIFI_REASON_NO_AP_FOUND, 找不到父节点的 AP, 你可以查看一下与父节点之间的信号强度
2. 人工组网的方式你用在哪一种场景中? 一般情况使用自组就可以了 参考:https://github.com/espressif/esp-mdf
2. 人工组网的方式你用在哪一种场景中? 一般情况使用自组就可以了 参考:https://github.com/espressif/esp-mdf
- Thu Oct 10, 2019 11:41 am
- Forum: ESP Mesh 中文讨论版
- Topic: 增加http server handlers及Mesh之间传文件咨询
- Replies: 1
- Views: 11883
Re: 增加http server handlers及Mesh之间传文件咨询
你的图片是多大,如果小于 8KB, 可以直接放在 http 的 body 中传输
- Tue Sep 17, 2019 9:33 am
- Forum: ESP-MDF
- Topic: ESP32 Mesh Mlink protocol
- Replies: 4
- Views: 11075
Re: ESP32 Mesh Mlink protocol
UDP and mDNS are only used for device discovery, that is, the IP address of the root node of the ESP-MESH network is obtained. If you need to control the device you need to send an http request http://static.zybuluo.com/zzc/67dx49vyi2fv1h4nooofii92/image.png POST /device_request HTTP/1.1 Host: 192.1...
- Tue Sep 10, 2019 3:44 am
- Forum: ESP Mesh 中文讨论版
- Topic: esp_wifi_start_scan() 使用条件
- Replies: 1
- Views: 10723
Re: esp_wifi_start_scan() 使用条件
请参考: https://gitlab.espressif.cn:6688/applic ... est.c#L278
1. 首先你需要停止 ESP-MESH 自组网的功能和停止上一次 wifi_scan
2. 当扫描不到数据时,需要重试
1. 首先你需要停止 ESP-MESH 自组网的功能和停止上一次 wifi_scan
2. 当扫描不到数据时,需要重试