Page 1 of 1

ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016

Posted: Thu Sep 22, 2016 3:03 pm
by rudi ;-)
look and be amazed

BT/BLE Stack Libraries

BT/BLE example
This is a BLE advertising demo with virtual HCI interface.
Send Reset/ADV_PARAM/ADV_DATA/ADV_ENABLE HCI command for BLE advertising



Now
I want to see your hands.
I want to see your hands up
I want to see your hands at the top
even higher!

( why not 1000 ? You may only use fonts up to size 200. )

Image

➡️ credit ⬅️

best wishes
rudi ;-)

Re: ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016

Posted: Fri Sep 23, 2016 11:36 am
by comcat
cooooool!

Re: ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016

Posted: Wed Feb 15, 2017 8:45 pm
by santanapablo1975
Hi Rudi,

I made the BLE test, and is working also, but in the typw I see "classic and BLE" in your case you got only "BLE" this parameter is configurable? I ask because the current consumption is to high around 130mA

Image

https://drive.google.com/open?id=0B7nmzZSGG6GqME9kV1RFa1hzWHZrUkhXZ09uY3p2Y2x1cElR

vielen dank in voraus!

Re: ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016

Posted: Thu Feb 16, 2017 5:03 pm
by rudi ;-)
santanapablo1975 wrote:Hi Rudi,

I made the BLE test, and is working also, but in the typw I see "classic and BLE" in your case you got only "BLE" this parameter is configurable? I ask because the current consumption is to high around 130mA

Image

https://drive.google.com/open?id=0B7nmzZSGG6GqME9kV1RFa1hzWHZrUkhXZ09uY3p2Y2x1cElR

vielen dank in voraus!


i used in the example preview version of esp-idf, there was some update in the meantime.
let us talk about in "General Discussion", "News" are informative only about News.

gern geschehen.

best wishes
rudi ;-)

edit:
@shadow
btw: https://github.com/espressif/arduino-esp32/pull/65

Re: ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016

Posted: Thu Feb 16, 2017 5:04 pm
by shadow
Now create an Arduino component for BLE :D