External flash memory

PeWosT
Posts: 10
Joined: Wed Feb 01, 2017 3:59 pm

External flash memory

Postby PeWosT » Thu Feb 02, 2017 8:04 am

Hi, I have some nor flash memory like micron M25P80-VMW6TG, how can I connect them to my esp32?

ESP_puff
Posts: 13
Joined: Tue Jan 10, 2017 8:34 am

Re: External flash memory

Postby ESP_puff » Thu Feb 09, 2017 11:39 am

Hi PeWosT,
You can look up the ESP32 datasheet. We use HSPI to connect external flash. You need to follow the protocol of HSPI.

Thanks

FCT_IOT
Posts: 37
Joined: Fri Jan 26, 2018 11:15 am

Re: External flash memory

Postby FCT_IOT » Fri Jan 26, 2018 11:33 am

Dear Sir,

I am interested in using ESP-WROOM-32D. I would like to connect an external SPI Flash.

I have made some research on various forums related to above mentioned topic. I have learnt the following alternatives:

1. Connecting to HSPI interface (as mentioned in this post)

2. Connecting to the same SPI Lines as the internal flash, but using a different gpio as a chip select line and using efuse.

I would like to know if there is any configuration steps required to connect external HSPI Flash, do we need to use efuse.

It would be helpful if espressif can release a step by step guide related to interfacing external flash.

Does Espressif provide higher capacity flash in ESP-WROOM -32D modules

Thanks in advance

FCT_IOT
Posts: 37
Joined: Fri Jan 26, 2018 11:15 am

Re: External flash memory

Postby FCT_IOT » Thu Feb 01, 2018 12:07 pm

Ping

WiFive
Posts: 3529
Joined: Tue Dec 01, 2015 7:35 am

Re: External flash memory

Postby WiFive » Thu Feb 01, 2018 2:12 pm

#2 is if you want to replace internal flash and boot from external flash. #1 is if you want to keep internal flash and add external flash for data. No efuse settings required for using hspi.

FCT_IOT
Posts: 37
Joined: Fri Jan 26, 2018 11:15 am

Re: External flash memory

Postby FCT_IOT » Thu Feb 01, 2018 2:17 pm

WiFive wrote:#2 is if you want to replace internal flash and boot from external flash. #1 is if you want to keep internal flash and add external flash for data. No efuse settings required for using hspi.
Thank you for the reply.

Who is online

Users browsing this forum: No registered users and 63 guests