ESP-PROG Serial Communication

iceman
Posts: 2
Joined: Mon Sep 13, 2021 4:56 pm

ESP-PROG Serial Communication

Postby iceman » Mon Sep 13, 2021 5:11 pm

Hi,

Has anyone been able to get the ESP-PROG to provide Serial communication information at all?
I just cannot get that function to work on 2x brand new ESP-PROG modules.

I have installed the VCP drivers and those ports are visible.
When I connect to the "higher" Serial port I see no data whatsoever.
When I try to program a device (ESP-01/ESP32) using the ESP-PROG the green LED flashes but there is no return data.

I have used the JTAG feature to debug an ESP32 board and that works, but wiring the Serial/Program port at the same time does not work either.

Any ideas?
Thanks.

ESP_Minatel
Posts: 361
Joined: Mon Jan 04, 2021 2:06 pm

Re: ESP-PROG Serial Communication

Postby ESP_Minatel » Mon Sep 13, 2021 7:05 pm

Hi,

Are you able to see the two COM ports detected when connecting the ESP-PROG?

Usually the COMx is the JTAG and COMx+1 is the serial port. Can you check if you can use the COMx+1 and try a simple loopback test?

For more details about, see this reference guide.

OllieK
Posts: 58
Joined: Mon Jan 18, 2016 8:08 am
Location: USA, PA
Contact:

Re: ESP-PROG Serial Communication

Postby OllieK » Tue Sep 14, 2021 6:07 am

Both ESP-PROG and 2232HL have worked with my ESP32 and ESP32-S2 boards supporting
- program download
- debugging
- serial communication with Kitty

iceman
Posts: 2
Joined: Mon Sep 13, 2021 4:56 pm

Re: ESP-PROG Serial Communication

Postby iceman » Tue Sep 21, 2021 10:23 am

Hi,
Thanks to you both for your responses.
Apologies for the delay on my side.

@ESP_Minatel - I tested the feedback loop last night and it worked.
I'll do some more testing later and get back to you.

Who is online

Users browsing this forum: No registered users and 90 guests