Page 1 of 1

Esp32 Devkit v1 PCB Eagle library

Posted: Sat Sep 01, 2018 9:33 pm
by leonidesfelix
Just to share this, i hope help somebody


Esp32 Devkit v1 PCB Eagle library

Its for the 30 pins version

Re: Esp32 Devkit v1 PCB Eagle library

Posted: Wed Sep 19, 2018 2:02 am
by trustmiao
nice one

Re: Esp32 Devkit v1 PCB Eagle library

Posted: Mon Nov 11, 2019 5:10 pm
by NosferatusPB300
Hi, tanks for the lib... I used to use this on my projects, but I want just warnig everyone that there are two erros (pin IO27 and pin GND1). Those pins was wrong conected.

Re: Esp32 Devkit v1 PCB Eagle library

Posted: Sun Nov 17, 2019 8:10 pm
by ljavih
Hi I use one of the libraries I found in the internet for the ESP32 development board, the one with 38 pins. The pin out and everything is correct. The problem is that when I printed the circuit the size of the board is bigger than the real size of the board, hence the ESP32 board didn't fit in the PCB. Actually the size of the board in the PCB fits perfect with an ESP8266 board. Does anyone knows how I could solve this and where I could found eagle libraries I could trust?

Re: Esp32 Devkit v1 PCB Eagle library

Posted: Thu Jan 09, 2020 4:16 pm
by Jimyxt
Hello,
I have corrected the pins assigment in the first submitted file, I also correct the pin separation as the pins are 1000 mils appart (1 inch). I hope it is OK and be useful for everyone. I took the measurements from a board I bough from DOIT.

Re: Esp32 Devkit v1 PCB Eagle library

Posted: Wed Sep 09, 2020 12:42 am
by westech
Thank you, I'm learning PCB in the Fusion 360 workspace. This should make life easier.