Page 1 of 1

ESP32 trINKet E-INK development board

Posted: Fri Dec 01, 2017 1:34 pm
by 0miker0
Image

Image

This design was an experiment using an E-Ink display. Another PCB revision is on the way that should allowing it to be powered from a battery. Right now it can only be powered using a microUSB cable.

The e-ink displays are 2.13" in size and can purchased from either BuyDisplay type or WaveShare. This project is not for sale but I encourage you to make your own. I've provided all the files below.

The programmer board is located at: https://github.com/mike-rankin/ESP32_Programmer

The enclosure designed in Fusion360 is located here: https://www.thingiverse.com/thing:2675865

The code right now does a hardware test verifying the display, sensors and wifi are functional are functional.