Mesh -demo on WROOM-32

Snaidy
Posts: 1
Joined: Wed Oct 11, 2017 4:39 pm

Mesh -demo on WROOM-32

Postby Snaidy » Wed Oct 11, 2017 4:48 pm

Hi,
I trying to port ESP Mesh_demo in to the WROOM-32.

https://github.com/espressif/ESP8266_MESH_DEMO

1. Is it possible to port it on Wroom32 ,as it is mentioned in espressif site as esp8266 code.
2. When I tried falshing in wroom ,I could flash but getting error as "Flash read Error 0x1000" and RTWDT keep resetting the device.
After flashing ,I set
GPIO15 - High
GPIO0 - High
GPIO12 - Low
EN - High


I also doubt the 4 bin generated is really for WROOM-32 and will it work,which same memory Mapping,I am using Flash download tool given by espressif to flash.


Thanks,
E.K

ESP_Sprite
Posts: 1113
Joined: Thu Nov 26, 2015 4:08 am

Re: Mesh -demo on WROOM-32

Postby ESP_Sprite » Thu Oct 12, 2017 1:44 am

The ESP8266 is, as the name implies, for the ESP8266; flashing it on the ESP32 is not going to work. We have a mesh solution for the ESP32 in the works, but at the moment that is not released yet.

Who is online

Users browsing this forum: No registered users and 1 guest