Page 1 of 1

Random interrupts on one of the ADC1 pins.

Posted: Wed Nov 06, 2019 12:03 pm
by zekageri
Hello guys!
I have an RFID reader. I attach an interrupt on one of the ADC1 pins (GPIO32 , 33, 34, 35, 36 39). for falling edge.
If i touch a tag card to it, i get the interrupt and i can read from it.
The problem is that after i get the first interrupt, i get several more interrupts. But this problem is never occour on any other pins of the esp32.

Here is my interrupt attach code:

Code: Select all

static const inline void External_Interrupts(){
    attachInterrupt(RFID_Intr_Pin, RFID_Intr_Flag, FALLING);
And here is the RFID_Intr_Flag function:

Code: Select all

tatic inline void IRAM_ATTR RFID_Intr_Flag(void) {
RFID_is_Touched = true;
The interrupt comes after the first randomly.
What is the problem? I disabled the ADC on these pins, and disabled the DAC registers too.

Code: Select all

static const inline void Turn_off_DAC(){