Re: OpenOCD and hardware debugger support
Posted: Tue Sep 27, 2016 3:06 am
So I am working on config/communication issues now. I am trying to use my Particle Programmer Shield, only ftdi 2232H device I have on hand using the config from the Particle github repo.
adapter speed: 200 kHz
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Error: libusb_open() failed with LIBUSB_ERROR_NOT_FOUND
Error: no device found
Error: unable to open ftdi device with vid 0403, pid 6010, description '*', serial '*' at bus location '*'
Just to confirm there are two esp32.cfg files. The one in target that I should not have to modify and the one copied in to the src dir from docs which I do, correct?
adapter speed: 200 kHz
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Error: libusb_open() failed with LIBUSB_ERROR_NOT_FOUND
Error: no device found
Error: unable to open ftdi device with vid 0403, pid 6010, description '*', serial '*' at bus location '*'
Just to confirm there are two esp32.cfg files. The one in target that I should not have to modify and the one copied in to the src dir from docs which I do, correct?