How to program ESP32-MeshKit-Sense V1.1?

sittingduck
Posts: 3
Joined: Thu Mar 28, 2019 9:35 am

How to program ESP32-MeshKit-Sense V1.1?

Postby sittingduck » Thu Mar 28, 2019 9:38 am

I have bought the ESP32-MeshKit-Sense V1.1 without any programming device. If attach it via USB to my PC it does not get detected as serial / COM device but it turns on.

I have read it can be programmed with the ESP32-program board using the "Download" header on the ESP32-MeshKit-Sense V1.1. But is it also possible to program this device, e.g. with a usual ESP32 DevKit V4 controller?

@In逍遥子
Posts: 76
Joined: Thu Nov 15, 2018 2:06 am

Re: How to program ESP32-MeshKit-Sense V1.1?

Postby @In逍遥子 » Thu Mar 28, 2019 12:16 pm

Yeah.if you don’t have esp-prog,you should use usb-ttl module to connect your device for flash.
But it’s not convenient for flash. I advice that you should buy esp-prog to flash.

@In逍遥子
Posts: 76
Joined: Thu Nov 15, 2018 2:06 am

Re: How to program ESP32-MeshKit-Sense V1.1?

Postby @In逍遥子 » Thu Mar 28, 2019 12:18 pm

If you use usb-ttl to flash,you should attention these strapping pins.https://www.espressif.com/sites/default ... pdf#page17

sittingduck
Posts: 3
Joined: Thu Mar 28, 2019 9:35 am

Re: How to program ESP32-MeshKit-Sense V1.1?

Postby sittingduck » Thu Mar 28, 2019 12:29 pm

Is it possible to program the MeshKit-Sense with an ESP32-DevKit device? Or do I really need a USB-TTL device?

@In逍遥子
Posts: 76
Joined: Thu Nov 15, 2018 2:06 am

Re: How to program ESP32-MeshKit-Sense V1.1?

Postby @In逍遥子 » Fri Mar 29, 2019 1:55 am

There seems to be no way to flash MeshKit-Sense with the ESP32-DevKit device.

Who is online

Users browsing this forum: No registered users and 1 guest