NT35510 Based Display

GeorgeIoak
Posts: 6
Joined: Wed May 24, 2017 8:50 pm

NT35510 Based Display

Postby GeorgeIoak » Sun Jan 06, 2019 8:44 pm

I saw in the repo that displays based on this driver are supported but I can't find any example LCDs that have been used or testing. This driver supports slightly larger screens (up to 5") with resolutions of 480 x 800 which is rather attractive. I assume with that high of a resolution we would have to use 8-bit mode (if possible) but I'd like to see an example of this working before I order parts and try anything.

@In逍遥子
Posts: 76
Joined: Thu Nov 15, 2018 2:06 am

Re: NT35510 Based Display

Postby @In逍遥子 » Mon Jan 07, 2019 3:00 am

The Sokoban example and nt35510 testcase use the NT35510 LCD. You can see this video also.

GeorgeIoak
Posts: 6
Joined: Wed May 24, 2017 8:50 pm

Re: NT35510 Based Display

Postby GeorgeIoak » Mon Jan 07, 2019 2:59 pm

Thank you for pointing those out to me. Could you also tell me what LCD was used in those examples? Maybe this one: https://www.aliexpress.com/item/IPS-4-3 ... el=twinner

@In逍遥子
Posts: 76
Joined: Thu Nov 15, 2018 2:06 am

Re: NT35510 Based Display

Postby @In逍遥子 » Tue Jan 08, 2019 3:54 am

OK,we use this.

GeorgeIoak
Posts: 6
Joined: Wed May 24, 2017 8:50 pm

Re: NT35510 Based Display

Postby GeorgeIoak » Tue Jan 08, 2019 2:47 pm

I'm sorry, but I wanted to make sure that I understand your response. Are you confirming that the display I found is the one that is used in the example code?

@In逍遥子
Posts: 76
Joined: Thu Nov 15, 2018 2:06 am

Re: NT35510 Based Display

Postby @In逍遥子 » Tue Jan 08, 2019 2:49 pm

OK,we use this screen that you refered.

Who is online

Users browsing this forum: No registered users and 4 guests