lyrat开发板无法焼写

caishiming777
Posts: 1
Joined: Tue Jun 15, 2021 9:40 am

lyrat开发板无法焼写

Postby caishiming777 » Tue Jun 15, 2021 9:47 am

测试lyrat开发板例程play_mp3,前面的过程挺顺利,到最后焼写一步怎么都不行,按照提示按mode键reset键进入download模式,putty也有反馈waiting for download,在esp-idf cmd里面总是说串口无法访问,请问有谁遇到过吗?

raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM3': PermissionError(13, '拒绝访问。', None, 5)
CMake Error at run_cmd.cmake:14 (message):
esptool.py failed
Call Stack (most recent call first):
run_esptool.cmake:21 (include)

ESP_HengYC
Posts: 184
Joined: Fri Dec 15, 2017 2:45 am

Re: lyrat开发板无法焼写

Postby ESP_HengYC » Wed Jun 16, 2021 8:18 am

caishiming777 wrote:
Tue Jun 15, 2021 9:47 am
测试lyrat开发板例程play_mp3,前面的过程挺顺利,到最后焼写一步怎么都不行,按照提示按mode键reset键进入download模式,putty也有反馈waiting for download,在esp-idf cmd里面总是说串口无法访问,请问有谁遇到过吗?

raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM3': PermissionError(13, '拒绝访问。', None, 5)
CMake Error at run_cmd.cmake:14 (message):
esptool.py failed
Call Stack (most recent call first):
run_esptool.cmake:21 (include)
Lyrat v4.3 如果选择手动烧写模式, 则是 先按 boot 键, 然后再按 rst 键, 然后释放按键即可。

并不是你说的 mode 键, 建议仔细阅读文档 :https://docs.espressif.com/projects/esp ... lyrat.html

ESP_HengYC
Posts: 184
Joined: Fri Dec 15, 2017 2:45 am

Re: lyrat开发板无法焼写

Postby ESP_HengYC » Wed Jun 16, 2021 8:19 am

ESP_HengYC wrote:
Wed Jun 16, 2021 8:18 am
caishiming777 wrote:
Tue Jun 15, 2021 9:47 am
测试lyrat开发板例程play_mp3,前面的过程挺顺利,到最后焼写一步怎么都不行,按照提示按mode键reset键进入download模式,putty也有反馈waiting for download,在esp-idf cmd里面总是说串口无法访问,请问有谁遇到过吗?

raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM3': PermissionError(13, '拒绝访问。', None, 5)
CMake Error at run_cmd.cmake:14 (message):
esptool.py failed
Call Stack (most recent call first):
run_esptool.cmake:21 (include)

Lyrat v4.3 如果选择手动烧写模式, 则是 先按 boot 键, 然后再按 rst 键, 然后释放按键即可。

并不是你说的 mode 键, 建议仔细阅读文档 :https://docs.espressif.com/projects/esp ... lyrat.html

Who is online

Users browsing this forum: No registered users and 37 guests