ESP32-C3-DevKit-RUST-1 - Device not responding to setup address.

guissalustiano
Posts: 1
Joined: Mon May 29, 2023 6:04 pm

ESP32-C3-DevKit-RUST-1 - Device not responding to setup address.

Postby guissalustiano » Mon May 29, 2023 6:26 pm

Hey,
I bought a ESP32-C3-DevKit-RUST-1 and start to follow the Espressif tutorial (https://esp-rs.github.io/espressif-trai ... dware.html), I plug my board into usb port but anything change in `lsusb`, in internet I discovered that I could debug with seeing `dmeg`, but I have any idea about what happens.

Code: Select all

[18731.228440] usb 1-1: new full-speed USB device number 7 using xhci_hcd
[18731.352052] usb 1-1: device descriptor read/64, error -71
[18731.581791] usb 1-1: device descriptor read/64, error -71
[18731.811721] usb 1-1: new full-speed USB device number 8 using xhci_hcd
[18731.935127] usb 1-1: device descriptor read/64, error -71
[18732.165092] usb 1-1: device descriptor read/64, error -71
[18732.271964] usb usb1-port1: attempt power cycle
[18732.675120] usb 1-1: new full-speed USB device number 9 using xhci_hcd
[18732.675315] usb 1-1: Device not responding to setup address.
[18732.881949] usb 1-1: Device not responding to setup address.
[18733.088446] usb 1-1: device not accepting address 9, error -71
[18733.211787] usb 1-1: new full-speed USB device number 10 using xhci_hcd
[18733.211981] usb 1-1: Device not responding to setup address.
[18733.418618] usb 1-1: Device not responding to setup address.
[18733.625102] usb 1-1: device not accepting address 10, error -71
[18733.625257] usb usb1-port1: unable to enumerate USB device
Could some one give me some light?

Who is online

Users browsing this forum: No registered users and 18 guests