EZSBC esp32 dev board spi pins?

Duhjoker
Posts: 85
Joined: Mon Mar 20, 2017 8:09 am

EZSBC esp32 dev board spi pins?

Postby Duhjoker » Mon Apr 17, 2017 11:24 pm

Hi guys

I've got one of these EZSBC esp32 dev boards and I am ready to start testing my graphics with my ili9341 TFT but I can't figure out which pins are what. I was hoping some one has a lil experience with these dev boards and can tell me which pins are the spi pins and which ones are digital IO for buttons. Is there a program I can run that can tell me this?
Fear is the mind killer.......

GameR the DIY iot gaming device that does more......
https://github.com/Duhjoker/GameR-Iot_ESP

ESP_Sprite
Posts: 3914
Joined: Thu Nov 26, 2015 4:08 am

Re: EZSBC esp32 dev board spi pins?

Postby ESP_Sprite » Tue Apr 18, 2017 1:15 am

Doesn't the maker of these boards release the schematics and/or pinouts of the thing?

WiFive
Posts: 2965
Joined: Tue Dec 01, 2015 7:35 am

Re: EZSBC esp32 dev board spi pins?

Postby WiFive » Tue Apr 18, 2017 3:42 am

Gpio# are labeled. Once you have that you tell the spi driver what pins you want and it uses gpio MUX/matrix to move spi functions to those pins. Other considerations are input only pins 34-39, flash pins 6-11, and strapping pins. Check pin list document.

Duhjoker
Posts: 85
Joined: Mon Mar 20, 2017 8:09 am

Re: EZSBC esp32 dev board spi pins?

Postby Duhjoker » Tue Apr 18, 2017 8:16 am

Ok how do I tell the spi driver what pins I want to use?
Fear is the mind killer.......

GameR the DIY iot gaming device that does more......
https://github.com/Duhjoker/GameR-Iot_ESP

WiFive
Posts: 2965
Joined: Tue Dec 01, 2015 7:35 am

Re: EZSBC esp32 dev board spi pins?

Postby WiFive » Tue Apr 18, 2017 8:26 am

It depends on what driver you are using. Maybe you want to check https://github.com/search?q=esp32+ili93 ... positories

Duhjoker
Posts: 85
Joined: Mon Mar 20, 2017 8:09 am

Re: EZSBC esp32 dev board spi pins?

Postby Duhjoker » Tue Apr 18, 2017 8:59 pm

I'm using the standard adafruit drivers that have been updated to use ESP32, my own library made using the best optimizations I could find with added ESP32 support.

On the links to the drivers you listed..... Are these for using the sdk or IDF or are they for arduino? My current work uses all arduino for the programming.
Fear is the mind killer.......

GameR the DIY iot gaming device that does more......
https://github.com/Duhjoker/GameR-Iot_ESP

Duhjoker
Posts: 85
Joined: Mon Mar 20, 2017 8:09 am

Re: EZSBC esp32 dev board spi pins?

Postby Duhjoker » Wed Apr 19, 2017 8:59 am

Thanks for the links!!! The speed at which these drivers pass spi is incredible and its not done.

Only problem was none of the examples listed have use for using it in the arduino ide. I need a .ino file or know how use the libraries with the idf or whatever. What out of all rhe stuff i downloaded is the program to use the esp32 native enviroment like gui or arduinos ide.
Fear is the mind killer.......

GameR the DIY iot gaming device that does more......
https://github.com/Duhjoker/GameR-Iot_ESP

Duhjoker
Posts: 85
Joined: Mon Mar 20, 2017 8:09 am

Re: EZSBC esp32 dev board spi pins?

Postby Duhjoker » Sat Apr 22, 2017 9:21 pm

Ok all the examples i can find use this pinout for the esp32.........

Image

I tested my screen on my teensy before trying to use it with the esp32 to make sure everything works properly.

But when ever i compile one of the ili9341 libraries found in the esp32 repsitory, the esp32 lights up its lil blue led but nothing on the screen.

Ive even tried a library by kurtE and nothing.

https://github.com/search?q=esp32+ili93 ... positories

Code: Select all

/***************************************************
  This is our GFX example for the Adafruit ILI9341 Breakout and Shield
  ----> http://www.adafruit.com/products/1651

  Check out the links above for our tutorials and wiring diagrams
  These displays use SPI to communicate, 4 or 5 pins are required to
  interface (RST is optional)
  Adafruit invests time and resources providing this open source code,
  please support Adafruit and open-source hardware by purchasing
  products from Adafruit!

  Written by Limor Fried/Ladyada for Adafruit Industries.
  MIT license, all text above must be included in any redistribution
 ****************************************************/


#include "SPI.h"
//#include "Adafruit_GFX.h"
#include "ILI9341_ESP32.h"

// For the Adafruit shield, these are the default.
#define TFT_DC 9
#define TFT_CS 10

///esp
#define TFT_SCK 18
#define TFT_MISO 19
#define TFT_MOSI 23
#define TFT_DC 5
#define TFT_CS 22
#define TFT_RST 17
// Use hardware SPI (on Uno, #13, #12, #11) and the above for CS/DC
//ILI9341_ESP32 tft = ILI9341_ESP32(TFT_CS, TFT_DC);
// If using the breakout, change pins as desired
ILI9341_ESP32 tft = ILI9341_ESP32(TFT_CS, TFT_DC, TFT_MOSI, TFT_SCK, TFT_RST, TFT_MISO);

void setup() {
  Serial.begin(9600);
  Serial.println("ILI9341 Test!"); 
// tft.useFrameBuffer()
  tft.begin();

  // read diagnostics (optional but can help debug problems)
  uint8_t x = tft.readcommand8(ILI9341_RDMODE);
  Serial.print("Display Power Mode: 0x"); Serial.println(x, HEX);
  x = tft.readcommand8(ILI9341_RDMADCTL);
  Serial.print("MADCTL Mode: 0x"); Serial.println(x, HEX);
  x = tft.readcommand8(ILI9341_RDPIXFMT);
  Serial.print("Pixel Format: 0x"); Serial.println(x, HEX);
  x = tft.readcommand8(ILI9341_RDIMGFMT);
  Serial.print("Image Format: 0x"); Serial.println(x, HEX);
  x = tft.readcommand8(ILI9341_RDSELFDIAG);
  Serial.print("Self Diagnostic: 0x"); Serial.println(x, HEX); 
  
  Serial.println(F("Benchmark                Time (microseconds)"));
  delay(10);
  Serial.print(F("Screen fill              "));
  Serial.println(testFillScreen());
  delay(500);

  Serial.print(F("Text                     "));
  Serial.println(testText());
  delay(3000);

  Serial.print(F("Lines                    "));
  Serial.println(testLines(ILI9341_CYAN));
  delay(500);

  Serial.print(F("Horiz/Vert Lines         "));
  Serial.println(testFastLines(ILI9341_RED, ILI9341_BLUE));
  delay(500);

  Serial.print(F("Rectangles (outline)     "));
  Serial.println(testRects(ILI9341_GREEN));
  delay(500);

  Serial.print(F("Rectangles (filled)      "));
  Serial.println(testFilledRects(ILI9341_YELLOW, ILI9341_MAGENTA));
  delay(500);

  Serial.print(F("Circles (filled)         "));
  Serial.println(testFilledCircles(10, ILI9341_MAGENTA));

  Serial.print(F("Circles (outline)        "));
  Serial.println(testCircles(10, ILI9341_WHITE));
  delay(500);

  Serial.print(F("Triangles (outline)      "));
  Serial.println(testTriangles());
  delay(500);

  Serial.print(F("Triangles (filled)       "));
  Serial.println(testFilledTriangles());
  delay(500);

  Serial.print(F("Rounded rects (outline)  "));
  Serial.println(testRoundRects());
  delay(500);

  Serial.print(F("Rounded rects (filled)   "));
  Serial.println(testFilledRoundRects());
  delay(500);

  Serial.println(F("Done!"));

}


void loop(void) {
  for(uint8_t rotation=0; rotation<4; rotation++) {
    tft.setRotation(rotation);
    testText();
    delay(1000);
  }
}

unsigned long testFillScreen() {
  unsigned long start = micros();
  tft.fillScreen(ILI9341_BLACK);
  yield();
  tft.fillScreen(ILI9341_RED);
  yield();
  tft.fillScreen(ILI9341_GREEN);
  yield();
  tft.fillScreen(ILI9341_BLUE);
  yield();
  tft.fillScreen(ILI9341_BLACK);
  yield();
  return micros() - start;
}

unsigned long testText() {
  tft.fillScreen(ILI9341_BLACK);
  unsigned long start = micros();
  tft.setCursor(0, 0);
  tft.setTextColor(ILI9341_WHITE);  tft.setTextSize(1);
  tft.println("Hello World!");
  tft.setTextColor(ILI9341_YELLOW); tft.setTextSize(2);
  tft.println(1234.56);
  tft.setTextColor(ILI9341_RED);    tft.setTextSize(3);
  tft.println(0xDEADBEEF, HEX);
  tft.println();
  tft.setTextColor(ILI9341_GREEN);
  tft.setTextSize(5);
  tft.println("Groop");
  tft.setTextSize(2);
  tft.println("I implore thee,");
  tft.setTextSize(1);
  tft.println("my foonting turlingdromes.");
  tft.println("And hooptiously drangle me");
  tft.println("with crinkly bindlewurdles,");
  tft.println("Or I will rend thee");
  tft.println("in the gobberwarts");
  tft.println("with my blurglecruncheon,");
  tft.println("see if I don't!");
  return micros() - start;
}

unsigned long testLines(uint16_t color) {
  unsigned long start, t;
  int           x1, y1, x2, y2,
                w = tft.width(),
                h = tft.height();

  tft.fillScreen(ILI9341_BLACK);
  yield();
  
  x1 = y1 = 0;
  y2    = h - 1;
  start = micros();
  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
  x2    = w - 1;
  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
  t     = micros() - start; // fillScreen doesn't count against timing

  yield();
  tft.fillScreen(ILI9341_BLACK);
  yield();

  x1    = w - 1;
  y1    = 0;
  y2    = h - 1;
  start = micros();
  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
  x2    = 0;
  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
  t    += micros() - start;

  yield();
  tft.fillScreen(ILI9341_BLACK);
  yield();

  x1    = 0;
  y1    = h - 1;
  y2    = 0;
  start = micros();
  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
  x2    = w - 1;
  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
  t    += micros() - start;

  yield();
  tft.fillScreen(ILI9341_BLACK);
  yield();

  x1    = w - 1;
  y1    = h - 1;
  y2    = 0;
  start = micros();
  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
  x2    = 0;
  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);

  yield();
  return micros() - start;
}

unsigned long testFastLines(uint16_t color1, uint16_t color2) {
  unsigned long start;
  int           x, y, w = tft.width(), h = tft.height();

  tft.fillScreen(ILI9341_BLACK);
  start = micros();
  for(y=0; y<h; y+=5) tft.drawFastHLine(0, y, w, color1);
  for(x=0; x<w; x+=5) tft.drawFastVLine(x, 0, h, color2);

  return micros() - start;
}

unsigned long testRects(uint16_t color) {
  unsigned long start;
  int           n, i, i2,
                cx = tft.width()  / 2,
                cy = tft.height() / 2;

  tft.fillScreen(ILI9341_BLACK);
  n     = min(tft.width(), tft.height());
  start = micros();
  for(i=2; i<n; i+=6) {
    i2 = i / 2;
    tft.drawRect(cx-i2, cy-i2, i, i, color);
  }

  return micros() - start;
}

unsigned long testFilledRects(uint16_t color1, uint16_t color2) {
  unsigned long start, t = 0;
  int           n, i, i2,
                cx = tft.width()  / 2 - 1,
                cy = tft.height() / 2 - 1;

  tft.fillScreen(ILI9341_BLACK);
  n = min(tft.width(), tft.height());
  for(i=n; i>0; i-=6) {
    i2    = i / 2;
    start = micros();
    tft.fillRect(cx-i2, cy-i2, i, i, color1);
    t    += micros() - start;
    // Outlines are not included in timing results
    tft.drawRect(cx-i2, cy-i2, i, i, color2);
    yield();
  }

  return t;
}

unsigned long testFilledCircles(uint8_t radius, uint16_t color) {
  unsigned long start;
  int x, y, w = tft.width(), h = tft.height(), r2 = radius * 2;

  tft.fillScreen(ILI9341_BLACK);
  start = micros();
  for(x=radius; x<w; x+=r2) {
    for(y=radius; y<h; y+=r2) {
      tft.fillCircle(x, y, radius, color);
    }
  }

  return micros() - start;
}

unsigned long testCircles(uint8_t radius, uint16_t color) {
  unsigned long start;
  int           x, y, r2 = radius * 2,
                w = tft.width()  + radius,
                h = tft.height() + radius;

  // Screen is not cleared for this one -- this is
  // intentional and does not affect the reported time.
  start = micros();
  for(x=0; x<w; x+=r2) {
    for(y=0; y<h; y+=r2) {
      tft.drawCircle(x, y, radius, color);
    }
  }

  return micros() - start;
}

unsigned long testTriangles() {
  unsigned long start;
  int           n, i, cx = tft.width()  / 2 - 1,
                      cy = tft.height() / 2 - 1;

  tft.fillScreen(ILI9341_BLACK);
  n     = min(cx, cy);
  start = micros();
  for(i=0; i<n; i+=5) {
    tft.drawTriangle(
      cx    , cy - i, // peak
      cx - i, cy + i, // bottom left
      cx + i, cy + i, // bottom right
      tft.color565(i, i, i));
  }

  return micros() - start;
}

unsigned long testFilledTriangles() {
  unsigned long start, t = 0;
  int           i, cx = tft.width()  / 2 - 1,
                   cy = tft.height() / 2 - 1;

  tft.fillScreen(ILI9341_BLACK);
  start = micros();
  for(i=min(cx,cy); i>10; i-=5) {
    start = micros();
    tft.fillTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i,
      tft.color565(0, i*10, i*10));
    t += micros() - start;
    tft.drawTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i,
      tft.color565(i*10, i*10, 0));
    yield();
  }

  return t;
}

unsigned long testRoundRects() {
  unsigned long start;
  int           w, i, i2,
                cx = tft.width()  / 2 - 1,
                cy = tft.height() / 2 - 1;

  tft.fillScreen(ILI9341_BLACK);
  w     = min(tft.width(), tft.height());
  start = micros();
  for(i=0; i<w; i+=6) {
    i2 = i / 2;
    tft.drawRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(i, 0, 0));
  }

  return micros() - start;
}

unsigned long testFilledRoundRects() {
  unsigned long start;
  int           i, i2,
                cx = tft.width()  / 2 - 1,
                cy = tft.height() / 2 - 1;

  tft.fillScreen(ILI9341_BLACK);
  start = micros();
  for(i=min(tft.width(), tft.height()); i>20; i-=6) {
    i2 = i / 2;
    tft.fillRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(0, i, 0));
    yield();
  }

  return micros() - start;
}
Fear is the mind killer.......

GameR the DIY iot gaming device that does more......
https://github.com/Duhjoker/GameR-Iot_ESP

Duhjoker
Posts: 85
Joined: Mon Mar 20, 2017 8:09 am

Re: EZSBC esp32 dev board spi pins?

Postby Duhjoker » Sun Apr 23, 2017 8:46 pm

Can I please get some support. I can't get it to do anything but program and I have no idea if that's working.
Fear is the mind killer.......

GameR the DIY iot gaming device that does more......
https://github.com/Duhjoker/GameR-Iot_ESP

Duhjoker
Posts: 85
Joined: Mon Mar 20, 2017 8:09 am

Re: EZSBC esp32 dev board spi pins?

Postby Duhjoker » Mon Apr 24, 2017 10:50 pm

Hello??? Is this for support of esp32 devboards? Kind of don't understand hats going on. Looks like I'm just gonna have to stay with my teensy. It's a shame though these processors are supposed to awesome but with out support its just a waste of time and money.
Fear is the mind killer.......

GameR the DIY iot gaming device that does more......
https://github.com/Duhjoker/GameR-Iot_ESP

Who is online

Users browsing this forum: No registered users and 44 guests