ESP32 Forum

ESP32 Official Forum
https://esp32.com/

ESP32 - all models - Does anyone use SVD files?

https://esp32.com/viewtopic.php?t=46276

Page 1 of 1

ESP32 - all models - Does anyone use SVD files?

Posted: Mon Jul 28, 2025 1:19 pm
by jgustavoam
https://github.com/cmsis-svd/cmsis-svd

"What is CMSIS-SVD
ARM provides the following description of CMSIS-SVD (System View Description)

The CMSIS System View Description format(CMSIS-SVD) formalizes the description of the system contained in ARM Cortex-M processor-based microcontrollers, in particular, the memory-mapped registers of peripherals. The detail contained in system view descriptions is comparable to the data in device reference manuals. The information ranges from high-level functional descriptions of a peripheral all the way down to the definition and purpose of an individual bit field in a memory-mapped register.

How Can the CMSIS-SVD Be Used
The generic description of each MCUs CPU and hardware registers is very valuable when generating code that can be used for talking to specific target hardware. In fact, much of the code in parts of CMSIS itself are generated based on the SVD. ARM distributes an executable that does this transformation (SVDConvert.exe).

The information can also be used for building debug tooling, test infrastructure, or whatever else."

For example (ESPRESSIF Boards):
https://github.com/cmsis-svd/cmsis-svd- ... /Espressif

It's amazing how much easier it is to access and manipulate registers, using SVD with TinyGo.
https://github.com/tinygo-org/tinygo

Re: ESP32 - all models - Does anyone use SVD files?

Posted: Mon Jul 28, 2025 3:54 pm
by jgustavoam
Compiling gen-dev-svd tool :

https://github.com/tinygo-org/tinygo/tr ... device-svd

mkdir out

go build gen-device-svd.go


Code: Select all

C:\Users\jgust\tinygo\programas\esp32\gen-device-svd>go build gen-device-svd.go

C:\Users\jgust\tinygo\programas\esp32\gen-device-svd>dir
 O volume na unidade C não tem nome.
 O Número de Série do Volume é DAAF-F4A4

 Pasta de C:\Users\jgust\tinygo\programas\esp32\gen-device-svd

28/07/2025  12:44    <DIR>          .
28/07/2025  12:43    <DIR>          ..
05/01/2025  08:08         1.726.633 esp32.svd
28/07/2025  12:42         5.019.648 gen-device-svd.exe
28/07/2025  12:18            44.948 gen-device-svd.go
28/07/2025  12:22    <DIR>          out
               3 arquivo(s)      6.791.229 bytes
               3 pasta(s)   111.886.942.208 bytes disponíveis

Generating esp32.go and esp32.s:

https://github.com/cmsis-svd/cmsis-svd- ... /Espressif

gen-device-svd ./ ./out

Code: Select all

C:\Users\jgust\tinygo\programas\esp32\gen-device-svd>gen-device-svd ./ ./out
esp32.svd

C:\Users\jgust\tinygo\programas\esp32\gen-device-svd>cd out

C:\Users\jgust\tinygo\programas\esp32\gen-device-svd\out>dir
 O volume na unidade C não tem nome.
 O Número de Série do Volume é DAAF-F4A4

 Pasta de C:\Users\jgust\tinygo\programas\esp32\gen-device-svd\out

28/07/2025  12:47    <DIR>          .
28/07/2025  12:44    <DIR>          ..
28/07/2025  12:47         3.383.829 esp32.go
28/07/2025  12:47             6.342 esp32.s
               2 arquivo(s)      3.390.171 bytes
               2 pasta(s)   111.636.013.056 bytes disponíveis

Re: ESP32 - all models - Does anyone use SVD files?

Posted: Mon Jul 28, 2025 4:51 pm
by jgustavoam
Some code of esp32.go :

Code: Select all

// SPI (Serial Peripheral Interface) Controller 0
	SPI0 = (*SPI_Type)(unsafe.Pointer(uintptr(0x3ff43000)))

	// Timer Group 0
	TIMG0 = (*TIMG_Type)(unsafe.Pointer(uintptr(0x3ff5f000)))

	// Two-Wire Automotive Interface
	TWAI0 = (*TWAI_Type)(unsafe.Pointer(uintptr(0x3ff6b000)))

	// UART (Universal Asynchronous Receiver-Transmitter) Controller 0
	UART0 = (*UART_Type)(unsafe.Pointer(uintptr(0x3ff40000)))

	// Universal Host Controller Interface 0
	UHCI0 = (*UHCI_Type)(unsafe.Pointer(uintptr(0x3ff54000)))

	// I2C (Inter-Integrated Circuit) Controller 1
	I2C1 = (*I2C_Type)(unsafe.Pointer(uintptr(0x3ff67000)))

	// I2S (Inter-IC Sound) Controller 1
	I2S1 = (*I2S_Type)(unsafe.Pointer(uintptr(0x3ff6d000)))

	// Motor Control Pulse-Width Modulation 1
	MCPWM1 = (*MCPWM_Type)(unsafe.Pointer(uintptr(0x3ff6c000)))

	// SPI (Serial Peripheral Interface) Controller 1
	SPI1 = (*SPI_Type)(unsafe.Pointer(uintptr(0x3ff42000)))

	// SPI (Serial Peripheral Interface) Controller 2
	SPI2 = (*SPI_Type)(unsafe.Pointer(uintptr(0x3ff64000)))

	// SPI (Serial Peripheral Interface) Controller 3
	SPI3 = (*SPI_Type)(unsafe.Pointer(uintptr(0x3ff65000)))

	// Timer Group 1
	TIMG1 = (*TIMG_Type)(unsafe.Pointer(uintptr(0x3ff60000)))

	// UART (Universal Asynchronous Receiver-Transmitter) Controller 1
	UART1 = (*UART_Type)(unsafe.Pointer(uintptr(0x3ff50000)))

	// UART (Universal Asynchronous Receiver-Transmitter) Controller 2
	UART2 = (*UART_Type)(unsafe.Pointer(uintptr(0x3ff6e000)))

	// Universal Host Controller Interface 1
	UHCI1 = (*UHCI_Type)(unsafe.Pointer(uintptr(0x3ff4c000)))

Code: Select all

func (o *DPORT_Type) SetPERIP_CLK_EN_UART1_CLK_EN( value uint32) {
	volatile.StoreUint32(&o.PERIP_CLK_EN.Reg, volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&^(0x20)|value<<5)
}
func (o *DPORT_Type) GetPERIP_CLK_EN_UART1_CLK_EN() uint32 {
	return (volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&0x20) >> 5
}
func (o *DPORT_Type) SetPERIP_CLK_EN_SPI2_CLK_EN( value uint32) {
	volatile.StoreUint32(&o.PERIP_CLK_EN.Reg, volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&^(0x40)|value<<6)
}
func (o *DPORT_Type) GetPERIP_CLK_EN_SPI2_CLK_EN() uint32 {
	return (volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&0x40) >> 6
}
func (o *DPORT_Type) SetPERIP_CLK_EN_I2C0_EXT0_CLK_EN( value uint32) {
	volatile.StoreUint32(&o.PERIP_CLK_EN.Reg, volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&^(0x80)|value<<7)
}
func (o *DPORT_Type) GetPERIP_CLK_EN_I2C0_EXT0_CLK_EN() uint32 {
	return (volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&0x80) >> 7
}

Re: ESP32 - all models - Does anyone use SVD files?

Posted: Mon Jul 28, 2025 4:52 pm
by jgustavoam
Some code of esp32.go :

Code: Select all

// SPI (Serial Peripheral Interface) Controller 0
	SPI0 = (*SPI_Type)(unsafe.Pointer(uintptr(0x3ff43000)))

	// Timer Group 0
	TIMG0 = (*TIMG_Type)(unsafe.Pointer(uintptr(0x3ff5f000)))

	// Two-Wire Automotive Interface
	TWAI0 = (*TWAI_Type)(unsafe.Pointer(uintptr(0x3ff6b000)))

	// UART (Universal Asynchronous Receiver-Transmitter) Controller 0
	UART0 = (*UART_Type)(unsafe.Pointer(uintptr(0x3ff40000)))

	// Universal Host Controller Interface 0
	UHCI0 = (*UHCI_Type)(unsafe.Pointer(uintptr(0x3ff54000)))

	// I2C (Inter-Integrated Circuit) Controller 1
	I2C1 = (*I2C_Type)(unsafe.Pointer(uintptr(0x3ff67000)))

	// I2S (Inter-IC Sound) Controller 1
	I2S1 = (*I2S_Type)(unsafe.Pointer(uintptr(0x3ff6d000)))

	// Motor Control Pulse-Width Modulation 1
	MCPWM1 = (*MCPWM_Type)(unsafe.Pointer(uintptr(0x3ff6c000)))

	// SPI (Serial Peripheral Interface) Controller 1
	SPI1 = (*SPI_Type)(unsafe.Pointer(uintptr(0x3ff42000)))

	// SPI (Serial Peripheral Interface) Controller 2
	SPI2 = (*SPI_Type)(unsafe.Pointer(uintptr(0x3ff64000)))

	// SPI (Serial Peripheral Interface) Controller 3
	SPI3 = (*SPI_Type)(unsafe.Pointer(uintptr(0x3ff65000)))

	// Timer Group 1
	TIMG1 = (*TIMG_Type)(unsafe.Pointer(uintptr(0x3ff60000)))

	// UART (Universal Asynchronous Receiver-Transmitter) Controller 1
	UART1 = (*UART_Type)(unsafe.Pointer(uintptr(0x3ff50000)))

	// UART (Universal Asynchronous Receiver-Transmitter) Controller 2
	UART2 = (*UART_Type)(unsafe.Pointer(uintptr(0x3ff6e000)))

	// Universal Host Controller Interface 1
	UHCI1 = (*UHCI_Type)(unsafe.Pointer(uintptr(0x3ff4c000)))

Code: Select all

func (o *DPORT_Type) SetPERIP_CLK_EN_UART1_CLK_EN( value uint32) {
	volatile.StoreUint32(&o.PERIP_CLK_EN.Reg, volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&^(0x20)|value<<5)
}
func (o *DPORT_Type) GetPERIP_CLK_EN_UART1_CLK_EN() uint32 {
	return (volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&0x20) >> 5
}
func (o *DPORT_Type) SetPERIP_CLK_EN_SPI2_CLK_EN( value uint32) {
	volatile.StoreUint32(&o.PERIP_CLK_EN.Reg, volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&^(0x40)|value<<6)
}
func (o *DPORT_Type) GetPERIP_CLK_EN_SPI2_CLK_EN() uint32 {
	return (volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&0x40) >> 6
}
func (o *DPORT_Type) SetPERIP_CLK_EN_I2C0_EXT0_CLK_EN( value uint32) {
	volatile.StoreUint32(&o.PERIP_CLK_EN.Reg, volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&^(0x80)|value<<7)
}
func (o *DPORT_Type) GetPERIP_CLK_EN_I2C0_EXT0_CLK_EN() uint32 {
	return (volatile.LoadUint32(&o.PERIP_CLK_EN.Reg)&0x80) >> 7
}
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/