Can't get the ESP32 CAM Module to work

[ishaanshri95]

greetings ya'll,

I've the following products:

https://makerbazar.in/products/esp32-ca ... era-module

https://adiy.in/shop/rp2040-type-c-pico-board-adiy-fly/

https://www.amazon.in/Robodo-W26-Wirele ... PY8GSZD15V

[it's not of the same brand but, it's the same board

My plan was to use the RP2040 as a pico-uart-bridge [ i did try using the uf2 from the repo as well as writing one myself in Arduino IDE and extracted the compiled binary ] and then connect my esp32 cam board with it for flashing it.

bbbbbbbbbbbbbbbbbbb.png (874.46 KiB) Viewed 4791 times

I did encounter this error at last, in the attachment.

aaaaaaaaaaaaaaa.png (270.86 KiB) Viewed 4791 times

If you could help me with this or let me know if I could use the ESP8266 module with the ESP32 cam module and make that work.

I'm starting with capturing a photo and save it to the SD card, then the next step is to get a live feed running onto a web portal locally accessible on my network.

[nopnop2002]

This may help.

https://github.com/nopnop2002/esp-idf-http-camera