--- Using \\.\COM11 instead...
--- esp-idf-monitor 1.9.0 on \\.\COM11 115200
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
ESP-ROM:esp32p4-eco2-20240710
Build:Jul 10 2024
rst:0x17 (CHIP_USB_UART_RESET),boot:0x300 (USB_BOOT)
wait usb download
以上是监测台输出的内容，点击烧录后，依旧无法烧录程序
Open On-Chip Debugger v0.12.0-esp32-20250707 (2025-07-06-17:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : accepting 'tcl' connection on tcp/6666
Info : dropped 'tcl' connection
Info : accepting 'tcl' connection on tcp/6666
ready
Flshing "c:/Users//Desktop/ESP32/hello_world/build/bootloader/bootloader.bin" at 0x2000
** program_esp input args <0x2000 no_clock_boost> **
Info : JTAG tap: esp32p4.tap0 tap/device found: 0x00012c25 (mfg: 0x612 (Espressif Systems), part: 0x0012, ver: 0x0)
Info : JTAG tap: esp32p4.tap1 tap/device found: 0x00012c25 (mfg: 0x612 (Espressif Systems), part: 0x0012, ver: 0x0)
Info : [esp32p4.hp.cpu1] datacount=1 progbufsize=2
[/OpenOCD]
[Flsh]
Failed to flsh the device (JTAG), please try again [got response: '-1', expecting: '0']
[/Fash]
[OpenOCD]
Error: [esp32p4.hp.cpu1] Fatal: Failed to read s0.Error: [esp32p4.hp.cpu1] Unsupported DTM version: -1
** Flashing Failed **
-1
Error: [esp32p4.hp.cpu1] Fatal: Failed to read s0.
Error: [esp32p4.hp.cpu1] Unsupported DTM version: -1
** Flashing Failed **
-1
Info : [esp32p4.hp.cpu0] Reset cause (24) - (JTAG CPU reset)
这些是点击烧录后，窗口输出的内容
小白刚接触esp32，求大佬帮忙解读一下