How do I change the battery level ?

[daemondong]

I'm using the example of ..\bluetooth\esp_hid_device to do some tests. I can use Lightblue APP on Android phone to read the battery level. It's 0x64 always. I can't find the code to change it. Could anyone can tell me after I get the voltage of battery how do I change the battery level? Thank you.

[daemondong]

I think this is the basic battery function. Could anyone help me about it ? Thank you.

[Sprite]

You can use esp_hidd_dev_battery_set for that.

[daemondong]

I updated the hid_demo_task as below. I could find the battery level was changed and set. But when I use Bluelight to read the battery level it still keeps 0x64.

Code: Untitled.c Select all

void hid_demo_task(void *pvParameters)

{

    static bool send_volum_up = false;

    static uint8_t tcn=0;

    static uint8_t lvlBatt=100;

    while (1) {

        tcn++;

        if (tcn>=5) {

            tcn=0;

            if (lvlBatt>30) lvlBatt--;

            esp_hidd_dev_battery_set(hid_dev,lvlBatt);

            ESP_LOGI(TAG, "Batt Level = %d",lvlBatt);

        }

        if (dev_connected) {

            ESP_LOGI(TAG, "Send the volume");

            if (send_volum_up) {

                esp_hidd_send_consumer_value(HID_CONSUMER_VOLUME_UP, true);

                vTaskDelay(100 / portTICK_PERIOD_MS);

                esp_hidd_send_consumer_value(HID_CONSUMER_VOLUME_UP, false);

            } else {

                esp_hidd_send_consumer_value(HID_CONSUMER_VOLUME_DOWN, true);

                vTaskDelay(100 / portTICK_PERIOD_MS);

                esp_hidd_send_consumer_value(HID_CONSUMER_VOLUME_DOWN, false);

            }

            send_volum_up = !send_volum_up;

        }

        vTaskDelay(2000 / portTICK_PERIOD_MS);

    }

}

Code: Untitled.tex Select all

I (61098) HID_DEV_DEMO: Batt Level = 94

I (61098) HID_DEV_DEMO: Send the volume

W (61098) Test: cmd=233,press=1



W (61198) Test: cmd=233,press=0



I (63198) HID_DEV_DEMO: Send the volume

W (63198) Test: cmd=234,press=1



W (63298) Test: cmd=234,press=0



I (65298) HID_DEV_DEMO: Send the volume

W (65298) Test: cmd=233,press=1



W (65398) Test: cmd=233,press=0



I (67398) HID_DEV_DEMO: Send the volume

W (67398) Test: cmd=234,press=1



W (67498) Test: cmd=234,press=0



I (69498) HID_DEV_DEMO: Send the volume

W (69498) Test: cmd=233,press=1



W (69598) Test: cmd=233,press=0



I (71598) HID_DEV_DEMO: Batt Level = 93

I (71598) HID_DEV_DEMO: Send the volume

W (71598) Test: cmd=234,press=1



W (71698) Test: cmd=234,press=0

[daemondong]

I got it. The battery level should be set as below.

Code: Select all

    
    if (deviceConnected) {
      pCharacteristicBatt->setValue((uint8_t*)&batterylevel, 1);
      pCharacteristicBatt->notify();

      Serial.printf("*** NOTIFY: %s ***\n", logRunning);
      //the function excepts string
      pCharacteristicRun->setValue((uint8_t *)logRunning,512);
      pCharacteristicRun->notify();
    }