ESP32 Forum

Posted: **Tue Mar 14, 2023 11:50 pm**

Hello there,

I'm struggling with calculations involving large floats. Running the following code on my Wemos Lolin32 Lite on Arduino featuring an ESP-32 Rev1

Code: Untitled.cpp Select all


double test = 2.;



void setup() {

  // put your setup code here, to run once:

  Serial.begin(31250);

}



void loop() {

  // put your main code here, to run repeatedly:

  test*=1.1;

  Serial.println(test);

}

leading to the following output after some time:

Code: Select all

3400938557.93
3741032413.72
4115135655.09
ovf
ovf
ovf

4115135655.09 is way below theoretical limits of float (3e38) let alone double (1e308). What's happening here? I know Esp32 is not the best number for fast or precise FLOPs, but something else but precision seems to be wrong here.

I would be glad if someone could reproduce this / help me / hint me at other resources, thanks in advance!

Posted: **Wed Mar 15, 2023 12:19 am**

That overflow seems to happen at the limit of a 32-bit integer. I'd guess the double variable itself doesn't overflow; it's the println routine that messes up. Perhaps you can see what happens if you replace that with a printf("%f\n", test); ?

ESP32 Forum

Working with large floating point numbers.

Working with large floating point numbers.

Re: Working with large floating point numbers.