Hello everyone.
Can anyone tell me how to program the C6 on this board?
I'm not very good at ESP, but I manage somehow, but this topic is beyond me. I don't know how to program the C6 to work with Wi-Fi and Bluetooth.
Thanks in advance for your help.
JC-ESP32P4-M3-DEV ESP32 C6 programming
Re: JC-ESP32P4-M3-DEV ESP32 C6 programming
Hi
This is not an official Espressif board, so I don't have the official schematic or documentation for this board.
Looking at the Internet, I found some images that show the exposed pins for flashing the ESP32-C6.
You will probably need an external USB-to-UART and flash the ESP32-C6 using the pins on the pin header.
The ESP-Hosted can be found here, and you need the FG version.
Make sure you have selected the "SDIO" on the configuration menu.
Maybe you can follow the guide of our function board.
This is not an official Espressif board, so I don't have the official schematic or documentation for this board.
Looking at the Internet, I found some images that show the exposed pins for flashing the ESP32-C6.
You will probably need an external USB-to-UART and flash the ESP32-C6 using the pins on the pin header.
The ESP-Hosted can be found here, and you need the FG version.
Make sure you have selected the "SDIO" on the configuration menu.
Maybe you can follow the guide of our function board.
Who is online
Users browsing this forum: PetalBot and 2 guests