An external pull-up resistor can strengthen the high-level state of GPIO0 during resets and reduce susceptibility to noise. Use a resistor value in the range of 4.7 kΩ to 10 kΩ.

Thank you. I'll try this.

Hi,
I am currently using the ESP32-WROOM-32UE.

In the field, the device occasionally stops functioning, even though the watchdog is active. When this occurs, performing a hardware reset restores normal operation.

I suspect that the device enters the ROM serial bootloader after the watchdog ...

There is only one difference between IDF setup success and failure.

It just need to add `idf_version.txt` in <IDF_TOOLS_PATH>\python_env\idf5.2_py3.11_env before download or search ESP-IDF setup.
Content of `idf_version.txt` file is `5.2`.

Hi,
I found below in log file you mentioned:

Error: Command failed: \"d:\\esp\\espressif\\tools\\idf-python\\3.11.2\\python.exe\" \"d:\\esp\\v5.2.2\\esp-idf\\tools\\idf_tools.py\" install-python-env\nERROR: Python environment is set to d:\\esp\\espressif\\python_env\\idf5.2_py3.11_env which was ...

Install ESP-IDF: v5.2.2
VSCode: v1.90.0
ESP-IDF Extension: v1.7.1

Hi,
I try to install ESP-IDF stable version(v5.2.2) in VSCode
But, I face error message when install it.

ESP-IDF was install in directory, but setup in vscode with esp-idf extension is not completed

Steps to reproduce.
1. Install ...

Test board: ESP32-S3 DevkitC-1
IDF Version: v5.2

Hi,
I have a question after testing with reference to [DFU via USB, USB OTG, USB Serial/JTAG] in the ESP-IDF Programming Guide.

According to the guide document, the ESP32-S3's default USB PHY connection is USB_SERIAL_JTAG.

Flashing was possible ...

I found point where paths change!

'validate_root_options' function in <idf path>/tools/idf_py_actions/core_ext.py.
This function use realpath about project_dir and build_dir. need to comment this.

Hi,

I set up a virtual drive the project path to prevent wrong path because of unicode.

Below is test directory of 'WrongPath' project.
Real path of project - D:\VSCode\한글경로\WrongPath
Virtual Path of project - P:\WrongPath

I try to menuconfig in virtual path, but idf.py refers to real path.

I ...

Hi,
I'm using VSCode with extension Espressif IDF v1.6.4 and ESP-IDF v5.0.2 on Windows 10.

In my case, I set up a virtual drive the project path to prevent paths that may cause problems, such as spaces at project path.

For example, when creating and using a project called Blink,
Real path is D ...

I'm using VSCode v1.82 and extension Espressif IDF v1.6.4 on Windows 10.

I have the same problem after installing idf v5.1. Even existing projects using idf v5.0 occur the same problem.

I tried adding "compileCommands": "${workspaceFolder}\\build\\compile_commands.json" to the configurations in ...